FINAL INSTALLATION
5. Install three 50-watt max. halogen bulbs (R) included. (Fig. 5)
IMPORTANT: When replacing bulbs, allow bulbs and light kit to
cool before touching them.
REMOTE CONTROL OPERATION
Operation buttons on the panel of the transmitter (P):
HI button
MED button
LOW button
OFF button
UP button
DOWN button
REV button
The light function is controlled by pressing the UP and/or DOWN button.
Tap either UP or DOWN button quickly to turn lights off or on. Hold
DOWN button down to increase or decrease lights. If you press DOWN
button in excess of 0.7 seconds it becomes a dimmer. The lights vary
cyclically in 0.8 seconds. The DOWN light button has an auto resume
function which keeps the lights at the same brightness as the last time
they were turned off.
for fan HIGH speed
for fan MEDIUM speed
for fan LOW speed
for turning fan OFF
for light ON/OFF, upper light
for light BRIGHTNESS and OFF, lower light
to REVERSE blade direction (fan must be on
low before reversing blade direction)
9
R
Fig. 5
P
F