Mettler Toledo XPR26PC Manual De Usuario página 6

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 57
Overview terminal
en
Name
Standby
Tare
Zero
Home
Open/close door
de
Bezeichnung
Standby
4
Description
By tapping
, the balance is not completely switched off but goes into standby
mode. To switch the balance completely off, it must be unplugged from the
power supply.
Note
Do not disconnect the balance from the power supply unless the balance is not
used for an extended period of time. After switching on the instrument, it must
warm up before giving accurate results.
Tares the balance.
This function is used between subsequent measurements. After taring the
balance, the screen shows
Zeroes the balance.
The balance must always be zeroed before starting the weighing process. After
zeroing, the balance sets a new zero point.
To return from any menu level to the main weighing screen.
Opens or closes the evaporation trap door.
Beschreibung
Durch Antippen von
wird die Waage nicht komplett ausgeschaltet, sondern in
den Standby-Modus umgeschaltet. Um die Waage vollständig auszuschalten,
muss diese von der Stromversorgung getrennt werden.
Hinweis
Trennen Sie die Waage nur von der Stromversorgung, wenn Sie für längere Zeit
nicht damit arbeiten. Nach dem Einschalten des Gerätes muss dieses zunächst
aufwärmen, bevor genaue Resultate angezeigt werden.
which indicates that all displayed weights are net.
Net

Publicidad

Tabla de contenido
loading

Tabla de contenido