Action (continued)
Press
to reach the next menu item.
Press
to reach the next menu item.
Press
to reach the next menu item, etc.
Press
during 3 s to validate any change.
1 Torque Preset
Current value
(activated or not)
4 Access Code Activation
Current code
"0": no Access
Code is activated
7 Escape
EAP-TFlex tools
PROGRAMMING
2 Data Recording
5 Unit Selection
Note:
It is possible to navigate in the menu by pressing either
Display / Result (continued)
"Nm" is displayed by default. Other possible units are
"FtLb" or "InLb".
6th menu item - Calibration (5 measures)
"CAL" is displayed. "C" LED lights ON.
7th menu item - Escape without saving
"ESC" is displayed.
1st menu item - Torque Preset, etc.
All settings are validated. "--" is displayed.
Ready to tighten.
3 Joint Stiffness
Current value
(activated or not)
6 Calibration
Current unit
Part no
6159932890
Issue no
02
Language English
Date
01/2010
166
Page
11 /
Current joint
stiffness
Current menu
name
or
.