Torque Preset (Max. 6 Torques) - Desoutter EAP2-65-TF Serie Manual Del Usuario

Part no 6159932890
Issue no 02
Language English
Date 01/2010
166
Page 12 /

2.1 - Torque Preset (max. 6 torques)

Up to six torques can be preset, changed and/or activated in the first menu item:
Action
Press to start the Torque Preset features.
Press or to toggle between "Toff" and "Ton".
Press when "Toff" is flashing.
Press when "Ton" is flashing to show the current
preset torque T1.
Press or to reach the new target torque for T1
(torque resolution = 0.1 Nm).
Press to validate T1.
Press or to reach the new target torque for T2
(torque resolution = 0.1 Nm).
Press to validate T2.
etc.
Press to validate T6.
Press during 3s to validate the new torque presets
(when needed).
Press or to change the activated preset
torque.
EAP-TFlex tools
PROGRAMMING
Display / Result
1st menu item - Torque Preset (max. 6 torques):
"Toff" is displayed (no torque is preset, by default). The
"Torque" LED lights ON.
"Toff" is flashing.
"Ton" or "Toff" is flashing.
"Toff" is displayed. Return to the "Torque Preset" menu.
"-T1-" is displayed for 2 s. Thereafter, the current preset
torque value T1 is displayed ("Tmax" by default).
The new target torque T1 is displayed.
The new preset torque T1 is validated.
"-T2-" is displayed for 2 s. Thereafter, the current preset
torque value T2 is displayed ("Tmax" by default).
The new target torque T2 is displayed.
The new preset torque T2 is validated.
"-T3-" is displayed for 2 s, etc.
The new target torque T6 is displayed.
The new preset torque T6 is validated.
"Ton" is displayed. The "Torque" LED still lights ON.
The six preset torques are validated. "--" is displayed. The
"Torque" LED lights OFF.
Ready to tighten.
The selected preset torque is activated and displayed.
Ready to tighten.