I Adjusti Ng The Cleaner's Movements (If Necessary) - Polaris QUATTRO Instrucciones De Instalación

3.2 I Adjusti ng the cleaner's movements (if necessary)

If the cleaner is operati ng correctly, it aspirates, sweeps and brushes all of the pool's surfaces randomly. Its ability to
climb the walls depends on the shape of the pool and the water fl ow rate or pressure. The cleaner climbs walls more
easily in pools with no sharp angles or curves between the pool bott om and the pool wall. Adjust the cleaner for opti mal
operati on as required.
3.2.1 Confi guring the thrust jet
9
3.2.2 Confi guring the thrust jet fl ow rate
Adjust the fl ow rate using a screwdriver.
10
12
3 3
6
Reduces the fl ow rate
Increases the fl ow rate
The thrust jet determines the directi on in which the
cleaner travels. The standard positi on of the jet is
the 3 o'clock positi on. However, other positi ons may
improve the cleaner's coverage depending on the
pool.
If necessary, use a tool to loosen the square nut,
adjust the positi on of the jet, then ti ghten to secure.