Nogueira SOFT DUO 1300 Manual De Instrucciones página 118

4. Preparation
The Spreader can be coupled to a Category 1 or
Category 2 tractor (see also "REQUIRED TRACTOR").
The lower arms of the hydraulic system should
be adjusted sideways so that there is sufficient
clearance to prevent the arms from striking the
tractor wheels.
Using the tractor stabilizers (stabilizer chains on
some models), center the machine with the tractor
and adjust the lateral clearance. If you have any
doubt, consult your tractor manual.
CAUTION!
• Make sure that the hydraulic arms
are securely attached to the Spreader
before transporting or using it.
• Be sure to place the locking pins (E) on
the coupling pins.
Failure to follow these instructions can
lead to personal injury and property
damage.
When maneuvering with the machine coupled
in the tractor, check if there is enough space to
carry out the movements and if there are no
people or animals near the machine.
30
ATTENTION!
Instructions Manual
CAT. 1
CAT. 2
E
E