Spreading Adjustments - Nogueira SOFT DUO 1300 Manual De Instrucciones

4.11- Spreading adjustments

There are several factors that can influence the uniformity of the distribution,
such as characteristics of the fertilizer or seed, climatic conditions, operating
conditions, etc.
Your Spreader has two features that allow you to make some adjustments to
correct any variations in the distribution profile, improving uniformity.
4.11.1- Setting the launchers
The Spreader has two rotors containing 4
launchers each. These parts can be arranged
on the disc in 4 different positions (angles),
suiting the product to be distributed.
To change the position of a launcher (L):
1.
Remove the bolt (K) and move the launcher to
the desired position;
2.
Replace the bolt (K).
t s
he preader leaves the factory with the launchers
1.
in position
PRODUCT DISTRIBUTION
As the launchers are moved to a hole of a bigger number in the disk, the
concentration of the product at the center of the distribution range increases.
Look at the illustrations below:
(-)
L
K
(+)
Instructions Manual
K
(+)
4. Preparation
(-)
41