4. Preparation
4.6- Operating height
It is recommended to distribute with a
working height (distance of the discs to the
ground) of 75 centimeters (see figure on the
side).
Start the hydraulic system and lift the machine
until the indicated height is reached.
4.7- Leveling
To ensure uniform distribution, it is important that
the machine works level in relation to the ground.
Once the working height (previous item) has been
adjusted, perform the leveling of the machine in
both directions as follow:
REAR LEVELING
To achieve leveling, adjust the tractor lift
rod.
By looking at the machine from behind, it should
work leveled.
SIDE LEVELING
To achieve leveling, adjust the arm of the
third point of the tractor. Extend or shorten
arm until leveling.
By looking at the machine from the side, it should
work leveled.
35
Instructions Manual