Nogueira SOFT DUO 1300 Manual De Instrucciones página 131

HOW TO REGULATE THE DOSERS:
1.
Remove the nuts (A);
2.
Remove the actuators (B) from the bore holes;
3.
Remove the nut and the bolt (C);
4.
Note that the dosing unit have several holes
numbered 1 to 9. These holes allow different
settings for the dosers.
The illustrations on the following page show how
the machine behaves when rotating the dosers.
5.
Attach the actuators (B) to the two dosing
plates in holes with the same number.
B
C
Instructions Manual
4. Preparation
A
A
B
43