Machine Supply; Application Rate Adjustment - Nogueira SOFT DUO 1300 Manual De Instrucciones

4. Preparation

4.8- Machine supply

The spreader can be filled manually or with
the support of implements (mechanical
shovel, loader, etc.). Observe it and do not
exceed the load capacity of the machine and
the tractor.
Maximum load capacity of the machine:
1800 kg.
Maximum load capacity of the tractor: see
'REQUIRED TRACTOR'.
The total weight filled will vary according to
the specific weight of the product used.
IMPORTANT!
a
more efficient and uniform distribution is
achieved with good quality
.
products
b ,
efore refueling
actuating the hydraulic cylinders
e
xtended cylinders

4.9- Application rate adjustment

The spreader has an exclusive regulation
system and an application rate adjustment
composed of two graduated regulators (A)
and a hydraulic cylinder (B) for each rotor. This
system is independent and can be operate
individually.
The graduated regulators (A) adjust the
opening of the doser plates, defining how
much the funds will open and, consequently,
what the flow rate of the product will be.
The hydraulic cylinders (B) have the function
of opening and closing the doser plates,
starting or stopping the distribution.
36
,
clean and dry
close the doser plates by
.
= .
closed bottoms
Instructions Manual
B
A