Fein Slugger JMU 404 M Serie Instrucciones De Uso página 25

Starting and stopping the drill motor
(figure 16).
To start the drive motor with clockwise rota-
tion, press the button with the symbol "
To start the motor with counterclockwise
rotation, press the buttons with the "
".
To stop the drill motor, press the "
ton.
Do not stop the drill motor during the drilling
procedure.
When the power supply is disconnected
while the motor is running, the electronics
prevent automatic restarting of the drive
motor. Restart the drive motor again.
In case of overload, the drill motor automati-
cally stops and must be restarted again.
Fig. 16
".
and
" but-
+ =
=
=
=
en
25