Withdrawal - Bowa TissueSeal PLUS COMFORT Manual Del Usuario

5 Operation
5. Using the foot switch of the HF device, activate the HF current for
coagulation:

A continuous acoustic signal sounds during the entire
sealing process to indicate that power is being supplied.

An alternating acoustic signal indicates the end of the
sealing process.
6. Release the foot switch to stop the supply of power.
7. Using the handle B, open the jaws A.

The tissue is coagulated.
Changing the output power of the HF device

Before increasing the output power of the HF device, check:

all HF cables and connectors are properly connected;

the ligation instrument is properly connected (see the
operating instructions of the HF device);

the foot switch works properly;

the insulation of the HF cable,

the active electrodes of the jaws A are clean and not worn
out.
5.3.

Withdrawal

Risk of patient injury due to damaged or broken-off
parts!

20 TissueSeal / TissueSeal PLUS COMFORT
WARNING
Check the ligation instrument after each use. All parts
must be present.
MN031-543-S0 EN