Fein AKFH18-5 Manual De Instrucciones página 11

Intended use of the power tool:
hand-guided bevel milling machine for profes-
sional use by instructed operating personnel
in weather-protected environments using the
application tools and accessories recom-
mended by FEIN:
– for machining workpieces made of steel,
cast steel, fine-grained steel, stainless steel,
aluminum, aluminum alloys, brass and plas-
tic
Symbols.
Symbol, character
DANGER
Explanation
Make sure to read the enclosed documents such as the Instruction
Manual and the General Safety Instructions.
Observe the instructions in the text or graphic opposite!
Observe the instructions in the text or graphic opposite!
General prohibition sign. This action is prohibited.
Before commencing this working step, remove the battery from the
power tool. Otherwise there may be danger of injury caused by
unintentional starting of the power tool.
Do not touch the rotating parts of the power tool.
Use eye protection during operation.
Use ear protection during operation.
Use protective gloves during operation.
Warning against sharp edges of application tools, such as the cutting
edges of the cutter blades.
A surface that can be touched may be very hot and thus hazardous.
This symbol confirms the certification of this product for the USA and
Canada.
Confirms the conformity of the power tool with the guidelines of the
European Community.
This sign warns of a directly imminent, dangerous situation. A false
reaction can cause a severe or fatal injury.
– for commercial use in industry and trade
– for the preparation of K-, V-, X- and Y-
shaped welding joints
– for machining visible edges in plant, equip-
ment and general engineering
– for rounding edges for optimal paint prep-
aration or as impact protection
en
11