Fein AKFH18-5 Manual De Instrucciones página 21

Mounting indexable inserts
(figure 7).
Press the locking button fully through and
hold it in place.
Position the indexable insert and fasten it
with the screw using the Torx screwdriver
15.
Rotate or turn around the eightfold heads as
required. Please note that milling head, guide
rollers and indexable inserts may vary
depending on the application. Only use acces-
sories approved for the application.
Fig. 7
Torx screwdriver 15
4.
TX 15
3.5 - 4.0 Nm
3.
Indexable inserts
1.
Locking button
1.
4.
5.
8.
en
2.
8x
2.
3.
180°
6.
7.
21