Össur FOOT-UP 07810 Serie Manual Del Usuario página 8

foot. Make sure the elastic strap is also pulled between the lace lines further
down the foot.
• Connect the ankle strap and the inlay by pushing the two parts of the quick-
acting closure together (figure D).
DETERMininG siZE: sHOElEss VERsiOn
The correct size is determined as follows:
1) Measure the circumference of the foot immediately behind the ball of the foot
(figure E).
2) Find the corresponding size in the table below.
size Circumference in cm
Small < 20 cm
Medium 20-24 cm
Large 24-28 cm
X-Large > 28 cm
FiTTinG THE sHOElEss VERsiOn
• Apply the ankle strap with the narrow Velcro strip at the botttom and the
quickacting closure at the front. In doing this place the ankle strap above the
widest part of the ankle. Fasten the ankle strap tightly, but do not constrict the
ankle (figure F).
• Place the shoeless bandage immediately behind the ball of the foot, so that the
button rests on top of the foot (figure G).
• Connect the ankle strap and the inlay by pushing the two parts of the quick-
acting closure together (figure H).
FOOT COMFORT
The anatomical design and the materials used make the Foot-Up both
comfortable to wear and userfriendly. The inlay has been designed in such a way
that the functionally intended raising of the forefoot can be established without
any effort. The Foot-Up is practically invisible, lightweight, and does not have to
be adapted to a shoe.
7