Cisco Systems Power System 2300 Guía De Instalación De Hardware página 37

Chapter 2 RPS 2300 Installation
.
Warning
Warning
Warning
Warning
Warning
Warning
78-17647-02
To prevent bodily injury when mounting or servicing this unit in a rack, you
must take special precautions to ensure that the system remains stable. The
following guidelines are provided to ensure your safety:
• This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
• When mounting this unit in a partially filled rack, load the rack from the bottom to the
top with the heaviest component at the bottom of the rack.
• If the rack is provided with stabilizing devices, install the stabilizers before mounting
or servicing the unit in the rack.
This unit is intended for installation in restricted access areas. A restricted
access area can be accessed only through the use of a special tool, lock and
key, or other means of security. Statement 1017
The plug-socket combination must be accessible at all times, because it serves
as the main disconnecting device. Statement 1019
This equipment must be grounded. Never defeat the ground conductor or
operate the equipment in the absence of a suitably installed ground conductor.
Contact the appropriate electrical inspection authority or an electrician if you
are uncertain that suitable grounding is available. Statement 1024
This unit might have more than one power supply connection. All connections
must be removed to de-energize the unit. Statement 1028
Only trained and qualified personnel should be allowed to install, replace, or
service this equipment. Statement 1030
Cisco Redundant Power System 2300 Hardware Installation Guide
Statement 1006
Preparing for Installation
2-3