Cisco Systems Power System 2300 Guía De Instalación De Hardware página 71

Appendix B Connector and Cable Specifications
RPS Cable for Other Supported Switches
Note
78-17647-02
The RPS cable (CAB-RPS-2300=) used with other supported switches is a
48-inch (1.5-meter) cable with a 22-pin connector on one end and a 14-pin
connector on the other end.
Table B-1 has the pinout information.
Do not use this cable with a Catalyst 3750-E or 3560-E switch.
Figure B-2 22-pin RPS Connector to the RPS 2300
Top of Connector (Logo Side)
12 13 14 15 16 17 18 19 20 21 22
1 2 3
Figure B-3 14-pin RPS Connector to the External Device
Top of Connector (Logo Side)
8 9 10 11 12 13 14
1 2 3
Cisco Redundant Power System 2300 Hardware Installation Guide
Figure B-2 and Figure B-3
4 5 6 7 8 9
4 5 6 7
RPS Cable for Other Supported Switches
show the connectors, and
10 11
B-3