Mounting The Rps 2300 In A Rack - Cisco Systems Power System 2300 Guía De Instalación De Hardware

Chapter 2 RPS 2300 Installation

Mounting the RPS 2300 in a Rack

78-17647-02
After you attach the brackets to the RPS 2300, use the four supplied number-12
Phillips machine screws to securely attach the brackets to the rack
Use the black Phillips machine screws to attach the cable guide to the left or right
bracket.
If you are installing the RPS 2300 in a rack with a switch stack, install the
Note
RPS 2300 at the bottom of the rack. If necessary, allow one RU space
between the RPS 2300 and the switch above to provide room for cabling.
Cisco Redundant Power System 2300 Hardware Installation Guide
Installing the RPS 2300
(Figure 2-3).
2-13