Capacitance Measurements - koban KMD-13 Instrucciones Operativas

CAPACITANCE MEASUREMENTS

WARNING: To avoid electric shock, disconnect power to
the unit under test and discharge all capacitors before
taking any capacitance measurements. Remove the
batteries and unplug the line cords.
1. Set the function switch to the CAP position. ("nF" and a
small value will appear in the display).
2. Insert the black test lead banana plug into the negative (-)
jack (COM) and the red test lead banana plug into the
positive (+) jack (CAP).
3. Touch the test leads to the capacitor to be tested. The
display will indicate the proper decimal point, value and
symbol.
www.grupotemper.com
AUTORANGING MULTIMETER
KMD-13
25