Data Hold Button - koban KMD-13 Instrucciones Operativas

KMD-13
AUTORANGING MULTIMETER

DATA HOLD BUTTON

The Data Hold function allows the meter to "freeze" a
measurement for later reference.
1. Press the DATA HOLD button to "freeze" the reading on
the indicator. The indicator "HOLD" will be appear in the
display.
2. Press the DATA HOLD button to return to normal
operation.
RELATIVE BUTTON
The relative measurement feature allows you to make
measurements relative to a stored reference value. A
reference voltage, current, etc. can be stored and
measurements made in comparison to that value. The
displayed value is the difference between the reference
value and the measured value.
1. Perform any measurement as described in the operating
instructions.
2. Press the RELATIVE button to store the reading in the
display and the "REL" indicator will appear on the display.
3. The display will now indicate the difference between the
16 www.grupotemper.com