Inserting The Sd Card - Bushnell 119598 Manual De Instrucciones

Note: as battery consumption is less of a concern when using the Solar Panel together to
supplement the internal batteries, Wake mode can be set (via text message) for a quicker
transition from standby (consumes more power). See pg. 30 regarding the use of "Wake" mode
vs "Eco" mode. The default Eco mode extends battery life.

Inserting the SD Card

Insert the SD card (with the camera's power switch in the OFF position) before
beginning to operate the camera. Don't insert or remove the SD card when
the power switch is in the ON position.
The WIRELESS Trophy Cam HD uses a standard SD (Secure Digital) memory
card to save photos (in .jpg format) and/or videos (in .mov format). SD and
SDHC (High Capacity) cards up to a maximum 32GB capacity are supported.
Using high speed SD cards (SanDisk
recommended if you will use the 1280x720 or 1920x1080 HD video settings.
Before inserting the SD card into the card slot after opening the camera's front
cover, please make sure that the write-protect switch on the side of the card
is "off" (NOT in the "Lock" position). The following describes how to insert and
remove the SD card:
• Insert the SD card into the card slot with its label side upwards (see
below). A "click" sound indicates that the card is installed successfully. If
the wrong side of the card is facing up, you will not be able to insert it
without force-there is only one correct way to insert cards. If the SD card
is not installed correctly, the device will not display an SD card icon on the
LCD in SETUP mode (the SD card icon displayed after switching to SETUP
mode will have a "lock" symbol inside it in it if the card is locked). Formatting
the SD card by using the WIRELESS Trophy Cam HD's "Format SD Card"
parameter before using it for the first time is recommended, especially
when a card has been used in other devices (see pg. 25, "Format SD Card"
for details).
• To take out the SD card, just gently push in the card (do not try to pull it
out without pushing in first). The card is released from the slot and ready
to be removed when you hear the click.
WARNING: Be sure the camera's power is switched
OFF before inserting or removing SD cards or
batteries.
SDHC rated class 6 or higher) is
®
11