sted (LEDs
and
are off), the
35÷80° C scale of the red LEDs
displays the boiler maintenance tem-
perature.
GAS CONVERSION
Should it be necessary to convert the
MALFUNCTIONS
– Ignition lock (fig. 3)
If the burner does not light the red
led ( ) turns on.
To attempt ignition again, rotate the
selector knob to ( ) and release it
immediately after returning it to
winter operations (
).
If it locks again, request an autho-
rised service control.
– Insufficient water pressure (fig. 4)
If the "0.5 bar" red light blinks, the
boiler does not work.
To restore operations, fill the system
until the green "1 bar" led turns on. If
all leds are off, request an authorised
service call.
– Safety/exhaust thermostat
triggered (fig. 5)
If the safety/exhaust thermostat
triggers the red "35°C" led blinks. To
attempt ignition again, rotate the
selector knob to ( ) and release it
immediately after returning it to
winter operations (
).
If it locks again, request an autho-
rised service control.
– Other faults (fig. 6)
When one of the red "40-80°C"
leds blinks, turn off the boiler and
attempt ignition again. This opera-
tion can be repeated 2-3 times at
most, in the event of failure, request
an authorised service call.
appliance to a different gas from the
one for which the boiler has been
equipped, approach the technical
staff.
CLEANING AND MAINTENANCE
Preventive
maintenance
SPIA ROSSA INTERMITTENTE
IN CONDIZIONE DI SICUREZZA
checking of the efficient operation of
the equipment and safety devices
must be carried out exclusively by the
authorized technical staff.
The boiler is supplied with an electric
cable. Should this require replace-
ment, contact exclusively with the
authorized technical staff.
and
SPIA ROSSA
RED LED
FLASHING RED LED
IN SAFETY CONDITION
SPIA ROSSA INTERMITTENTE
FLASHING RED LED
SPIA ROSSA INTERMITTENTE
FLASHING RED LED
IT
ES
FR
BE
GB
RO
RUS
Fig. 3
Fig. 4
Fig. 5
Fig. 6
119