Lighting And Operation; Temperature Adjustment - Sime Planet Dewy 60 BFR Manual De Instrucciones

USER INSTRUCTIONS
IT
ES
– In case of fault and/or incorrect equipment operation, deactivate it, without making any repairs or taking any direct
action. Contact an authorised technical staff.
FR
– The installation of the boiler and any servicing or maintenance job must be carried out by qualified personnel. Under
BE
no circumstances, the devices sealed by the manufacturer can be tampered with.
– It is absolutely prohibited to block the intake grilles and the aeration opening of the room where the equipment is
GB
installed.
RO
RUS

LIGHTING AND OPERATION

BOILER IGNITION (fig. 1)
Open the gas tap, lower the control
cover and turn on the boiler by rota-
ting the selector knob to winter (
The green led ( ) turn on to indica-
te that power is on. The boiler, once
the temperature set on the potentio-
meter is reached, will start automa-
tic operations to provide the system
with the required power.
BOILER SHUTDOWN (fig. 1)
To turn OFF the boiler, turn the selec-
tor knob to (OFF).
For pr olonged periods of disuse,
disconnect the power supply, close the
gas tap and, in the event of low tempe-
ratures, empty the boiler and hydraulic
system to prevent pipes from bursting
due to frozen water.

TEMPERATURE ADJUSTMENT

(fig. 2)
- Heating temperature is adjusted
using the heating knob ( ). The set
temperature is indicated on the red
led scale from 35 - 80°C and the yel-
low heating led ( ) turns on simulta-
neously. If the water return tempera-
ture is lower than about 55° C, com-
bustion product condensates further
increasing heat exchange efficiency.
- If an external boiler is present, the
temperature of the water can be
adjusted through the water knob
( ). If hot water is also requested,
the yellow "water" LED switches on
( ).
When heating and water are reque-
118
WARNINGS
).
OPEN
APRE
GREEN LED
SPIA VERDE
SPIA ROSSA
RED LED
Fig. 1
SPIA GIALLA
YELLOW LED
Fig. 2