Sensor Selection - Siemens SITRANS FUH1010 IP65 NEMA 7 Compact Guía Rápida

Commissioning
3.4 Programming the Transmitter
①
②
Figure 3-6

Sensor Selection

The following is a typical sensor installation procedure.
1. At the [Chan/Path Setup] menu, trigger the<Down Arrow> to select [install Sensor].
2. Trigger <Right Arrow> then <Down Arrow> to [Transducer Model].
3. Trigger <Right Arrow>.
4. Trigger <Down Arrow>and scroll to select the sensor model number on the sensor label
30
Hi Precision sensor model number
Sensor size
Hi Precision Sensor Label
FUH1010 IP65 NEMA 7 Interface Detector Quick Start
Operating Instructions, 06/2014, A5E02428148-AA