Sensor Selection - Siemens SITRANS F FUS1010 IP65 NEMA 4X Instrucciones De Servicio

Connecting
3.4 Programming the Transmitter
①
②
Figure 3-7

Sensor Selection

The following is a typical sensor selection procedure.
1. Press <Left Arrow> to return to Main Menu. At the [Meter Type], press the <Right Arrow>
2. The [Channel Setup] menu will appear.
3. Press the <Down Arrow> to select [Install Sensor].
4. Press the <Right Arrow> to [Sensor Model]. Press <Right Arrow> and scroll to select the
36
Hi Precision sensor model number
Sensor size
Hi Precision Sensor Label
and then <ENTER>.
sensor model number on the sensor label.
FUS1010 IP65 NEMA 4X & IP66 NEMA 7 Quick Start
Operating Instructions, 01/2013, A5E03086486-AC