Starting The Memory Function - Siemens iQ100 Instrucciones De Uso

Notes
Starting the
Memory function
The cooking time has
elapsed
Pausing
112
You can also store grill only or grill combined with
microwave.
You cannot store several microwave power settings
one after the other.
You cannot save automatic programmes.
You can store the memory settings and start the
appliance immediately. To do this, press start instead
of "M".
Adding to the memory:
Press "M". The old settings are displayed. Save the
new programme as described in steps 1 4.
It is very easy to start the saved programme. Place
your meal into the appliance. Close the appliance
door.
1.
Press "M".
The stored settings are displayed.
2.
Press start.
The cooking time counts down in the display.
A signal sounds. The appliance switches off. Open
the appliance door or press stop.
Open the appliance door. Press the start button again
after closing the door. The programme will then
continue.