Cleaning Method - Siemens iQ100 Instrucciones De Uso

Appliance door and
seal
Environment

Cleaning method

Repairs
88
d
Never operate the appliance if the appliance door is
damaged. Otherwise microwave energy may escape.
Call the after sales service.
The appliance door must close properly.
If the seal is very dirty, the appliance door will no
longer close properly during operation. The fronts of
adjacent units could be damaged. Always keep the
seal clean.
d
There is a danger of short circuiting.
Never expose the appliance to excessive heat or
moisture.
Only use this appliance indoors.
d
Do not use high pressure cleaners or steam jet
cleaners.
Short circuit, risk of electric shock.
Clean the appliance on a regular basis. The surface of
the appliance could be destroyed and the appliance
could corrode over time if it is not cleaned with
sufficient care. Microwave energy could escape.
d
Repairs must be carried out only by after sales
service engineers who have been trained by the
manufacturer. Repairs that are carried out incorrectly
may constitute a serious hazard to the user.
Never carry out repair or maintenance work which
requires you to remove the cover that protects against
microwave energy. Call the after sales service.
You must not open the casing. The appliance is a
high voltage appliance.
Never switch on a defective appliance. Pull out the
appliance plug. Call the after sales service.
Never replace the cooking compartment light yourself.
Call the after sales service.
CAUTION: Repair and maintenance work in which the
cover that protects against microwave energy must
be removed must only be carried out be specialist
personnel, due to the risks involved.