Troubleshooting - Siemens iQ100 Instrucciones De Uso

Troubleshooting

Problem
The appliance does not work.
Three zeros flash in the
display.
The appliance is not in
operation. A cooking time p g
appears in the display.
The microwave does not work. The door is not properly
The food takes longer than
usual to heat up.
The turntable is making a
scratching or grinding noise.
Malfunctions often have simple explanations. Please
read the following instructions before calling the
after sales service:
Possible cause
The plug is not plugged
into the mains.
Power cut.
Blown fuse.
Faulty control.
Power cut.
The rotary knob was
accidentally pressed.
Start was not pressed after
the setting had been made.
closed.
Start was not pressed.
The microwave setting is
too low.
You have placed a larger
amount of food than normal
in the appliance.
The food was colder than
usual.
There is dirt or a foreign
object in the area around
the turntable drive.
Notes/remedial action
Plug it in.
Check whether the kitchen light
switches on.
Look in the fuse box to make sure that
the fuse for the appliance is OK.
Switch the appliance off using the fuse
in the fuse box. Wait approximately
10 seconds and then switch it back on.
Reset the time.
Press Stop.
Press Start or clear the setting with
Stop.
Check whether leftover food or a foreign
object is trapped in the door.
Press Start.
Select a higher microwave setting.
Double the amount = double the
cooking time.
Stir or turn the food during cooking
Clean the roller ring and recess in the
cooking compartment.
115