Product Information - Siemens SIMATIC HMI KTP700F Mobile HW Información Del Producto

SIMATIC HMI
KTP700F Mobile HW, KTP700F Mobile HW/OR

Product Information

A5E44033674
Applicability
The product information applies to the following HMI devices:
● SIMATIC HMI KTP700F Mobile HW with handwheel (HW), article number 6AV2145-8GB00-0AA0
● SIMATIC HMI KTP700F Mobile HW/OR with handwheel (HW) and Override (OR), article number 6AV2145-8GB01-0AA0
In terms of electronics and interfaces, the HMI devices are based on the SIMATIC HMI KTP700F Mobile and provide the
corresponding functional scope. You can find the description of the SIMATIC HMI KTP700F Mobile in the "Operating
instructions Mobile Panels 2nd Generation (https://support.industry.siemens.com/cs/ww/en/view/109477845)" on which this
product information is based. You can operate the HMI devices in combination with the connection boxes and further system
components in accordance with these operating instructions.
In this documentation, the respective short form "KTP700F Mobile" is used for the HMI devices.
This product information describes the technical differences as compared to KTP700F Mobile.
Unless otherwise described in this product information, all specifications in the underlying operating instructions for
KTP700F Mobile, which means specifications regarding hardware, software, maintenance and service, apply to this device.
The information in this product information takes precedence over statements in the following Overall documentation Mobile
Panels 2nd Generation (https://support.industry.siemens.com/cs/ww/en/ps/14746/man).
Note
This document belongs to the device and will also be required for repeat commissioning. Keep all supplied and
supplementary documentation for the entire service life of the device.
Pass on all of these documents to a future owner of the device.
Features
In contrast to KTP700F Mobile, the HMI device has the following features:
● 9" housing
● Handwheel
● Override rotary switch (optional, depending on the device version)
● Only 1 function block with 6 function keys at the bottom
See also
Technical specifications (Page 28)
© Siemens AG 2018. All rights reserved
15
A5E44033674-AA, 08/2018