Design of the KTP700F HW/OR
Note
System components
To operate a Mobile Panel, you need:
An HMI device
•
A connecting cable (https://support.industry.siemens.com/cs/ww/en/view/109477845)
•
At least one connection box (https://support.industry.siemens.com/cs/ww/en/view/109477845)
•
For hardwired F-systems: A safety relay (https://support.industry.siemens.com/cs/ww/en/view/109477845)
•
You can find the ordering information for the system components on the Internet
(https://mall.industry.siemens.com/mall/en/de/Catalog/Products/10165537).
Front and side views
The following figures show the structure of the fail-safe HMI device KTP700F Mobile HW/OR:
①
Keyswitch
②
Acknowledgment button
③
Emergency stop / stop button
④
Fall protection for the emergency stop / stop button
⑤
Cover cap for USB port
⑥
Handle
⑦
Override rotary switch (only for device version with Override)
⑧
Handwheel with recess
⑨
Display with touch screen
⑩
Function keys
⑪
Illuminated pushbutton
The position of the emergency stop button makes it easily accessible. Due to its profiled design, the emergency stop button
is easily accessible. Two bumpers protect the emergency stop / stop button against impact damage, for example, if it falls.
The bumpers are dimensioned so that the emergency stop / stop button can be activated during an impact.
The operator controls are described in the section "Operator controls and displays (Page 17)".
16
KTP700F Mobile HW, KTP700F Mobile HW/OR
A5E44033674-AA, 08/2018