Danfoss TP9000 Guia Del Usuario página 11

c) Use the Λ and V buttons to adjust the required TEMPERATURE
(CH only).
d) Press NEXT to move to the next preset time
and/or temperature (Event 2).
e) Repeat steps b, c, & d to programme the
remaining weekday events.
f ) Press DAY/HOL to move on to weekend events.
For Weekends
Press PROG until the fi rst preset time and
temperature (Event 1 Days SAT, SUN) appears in
display.
Repeat steps b, c, & d above to programme the remaining weekend
events.
Press PROG to return to the main screen.
Changing the preset programmes in 24 hour mode
a) Press PROG until the fi rst preset time and
temperature (Event 1 for all days of the
week) appears in display.
b) Use the + and - buttons to adjust the TIME (press and hold to
change in 10 min increments).
c) Use the Λ and V buttons to adjust the required TEMPERATURE
(CH only).
d) Press NEXT to move to the next preset time
and/or temperature (Event 2).
e) Repeat steps b, c, & d to programme the
remaining events.
f ) Press DAY/HOL to move on to weekend events.
Danfoss Heating
All manuals and user guides at all-guides.com
GB GB
PL
GR
ES
11