Danfoss TP9000 Guia Del Usuario página 21

This option enables or disables the Advanced Copy
Functionality. Press + until option 2 is selected, use
Λ or V to select required setting
Setting 0 Advanced Copy disabled (standard copy mode)
Setting 1 Advanced Copy enabled
Option 3 - Calendar clock rules
This establishes the rules that the automatic
calendar clock follows to calculate changes
between summer and winter time. Press + until
Option 3 is displayed, use Λ and V to select
required setting
Setting 0 Disabled.
Manual: user must change using + to advance and - to
Setting 1
retard displayed time.
Setting 2 European rules. (Factory Setting)
Setting 3 USA rules (2007 onwards)
Setting 4 USA rules (pre-2007)
Option 4 - Time zone off set
This feature allows the time zone to be established
and corrects time display. Press + until Option 4 is
displayed, use Λ and V to select required setting
UK models: this feature should be left at the factory
Setting 0
setting of 0.
Central European time models: this feature should be
Setting 1
left at the factory setting of +1:00.
-12 Hours +14 Hours
Rest of World: use Λ and V keys to select off set from Universal time
(GMT) for the location in which the thermostat is being installed.
Option 10 - Frost/ thermostat mode setting
This feature allows the default frost/thermostat
mode temperature to be set. Press + until Option
10 is displayed, use Λ and V to select required
setting.
5-40°C - Factory setting is 5°C, but can be changed to any value
between 5-40°C.
Danfoss Heating
All manuals and user guides at all-guides.com
GB GB
PL
GR
ES
21