to the above all of the Installer Advanced Programming settings are
returned to factory settings, however, time, date and service due
date are not reset.
Installer Settings
Option
Description
Option 30
Set upper limit of temperature range
Option 31
Set lower limit of temperature range
Option 32
Enable Off at lower limit
Option 33
Enable On at upper limit
Option 34
Select On/Off or Chrono-proportional
Option 35
Set Integration Time
Option 36
Set temperature override rule
Option 37
Set time duration of override rule
Option 40
Number of events per day (Heating)
Option 41
Operating mode (Heating)
Option 60
Number of events per day (Hot Water)
Option 61
Operating Mode (Water)
Option 70
Keyboard disable rules
Option 71
Random start rules
Option 72
Owner site reference number
Option 73
Owner thermostat reference number
Option 74
Date format for calendar clock
Option 80
Enable/Disable + hrs boost
Option 81
Thermostat calibration bias
Option 90
Defi ne remote sensor type
Option 93
Set limit sensor set-point
Option 94
Confi gure digital input switch type
User Settings
Option
Description
Option 1
Enable/disable A/B programming
Option 2
Enable/Disable advanced programming
Option 3
Calendar clock rules
Option 4
Time zone off set
Option 10
Frost/thermostat mode setting
Option 11
Start-up method
Option 12
Optimum start control pre-heat setting
Option 13
Optimum start control/delayed start event
setting
Danfoss Heating
All manuals and user guides at all-guides.com
Installer Setting
User Settings
25
GB
GB
PL
GR
ES