Bosch SCT 815 Manual Original página 12

en | 12 | SCT 815
1 User instructions... ......................................
1.1 Symbols in the documentation... ..................
1.2 Warnings in the documentation... .................
1.3 Target group... ..............................................
1.4 Warranty and liability... .................................
1.5 Safety Notes... ..............................................
1.6 Related documents... ....................................
2 Product description... ..................................
2.1 Intended Use... .............................................
2.2 Product versions... ........................................
2.3 Scope of delivery... .......................................
2.4 Overview SCT 815... .....................................
2.5 Prerequisites... ..............................................
2.6 Laser range finder
2.7 Functional description... ...............................
3 Initial Operation... .......................................
3.1 Installing the SCT 815... ...............................
4 Operation... ..................................................
4.1 Positioning the SCT 815 for radar sensor
calibration... .................................................
4.2 Attaching the line laser to the SCT
4.3 Adjusting the distance between the SCT 815
and the vehicle... ..........................................
4.4 Aligning the SCT 815 with the vehicle's
longitudinal center
4.5 Adjusting the height of the prismatic
reflector... .....................................................
4.6 Setting the offset (up to 25cm) from the
vehicle's longitudinal center
4.7 Setting the offset (25cm and above) from the
vehicle's longitudinal center
5 Maintenance... .............................................
5.1 Cleaning... .....................................................
5.2 Spare parts... ................................................
5.3 Changing the positioning
6 Decommissioning... .....................................
6.1 Changing location... ......................................
6.2 Disposal and scrapping... .............................
7 Technical specifications... ...........................
7.1 Dimensions and weights... ............................
1 689 989 362 | 2018-08-01
12
12
12
12
12
13
13
13
13
13
13
14
14
GLM20... ......................... 14
14
15
15
16
16
815... ..... 16
17
plane... ........................... 18
18
plane... ............ 19
plane... ............ 20
20
20
20
foot... ................... 20
21
21
21
21
21
1. User instructions
1.1 Symbols in the documentation
Warning of possible physical damage to the component,
product or environmental pollution.
Practical hints, recommendation or reference to other
information
Warning of possible danger for the operator during
subsequent procedures
Single-step procedure
Optional step
Result of a procedure
Reference to a figure. Example:
figure 12, item 2
Reference to a page.
1.2 Warnings in the documentation
Warning notices warn of dangers to the user or people
in the vicinity. Warnings also indicate the type, source
and consequences of the danger as well as preventive
action.
Warning notices have the following structure:
Signal word
Warning Type, source and consequences of the
symbol danger.
 Actions and instructions to prevent the
danger.
The signal word indicates the likelihood of occurrence
and the severity of the danger in the event of non-
observance:
Signal word Likelihood of
occurrence
DANGER Immediate threat of
danger
WARNING Possible impending
danger
CAUTION Possible dangerous
situation
1.3 Target group
The product may be used only by skilled and instructed
personnel. Apprentices or personnel undergoing
training or instruction may use the product only under
the continual supervision of an experienced person.
Children must be supervised to ensure that they do not
play with the product.
---Separator---
1.4 Warranty and liability
No modifications may be carried out on our products.
Our products may only be used with genuine
accessories and genuine spare parts. Otherwise, all
warranty claims will be rendered null and void.
---Separator---
12(2)
means
Severity of danger with
non-observance
Death or severe injury
Death or severe injury
Minor injury
Robert Bosch GmbH