Greenlee IPM-300 Manual De Instrucciones página 11

Operation
1. Set the selector to the proper setting.
2. Press the SOURCE/READ button to select the function.
3. See Using the IPM-300 as a Source or Using the IPM-300 to Read for specific instruc-
tions.
4. Test the unit on a known functioning circuit or component.
• If the unit does not function as expected on a known functioning circuit, replace the
batteries and/or fuses.
• If the unit still does not function as expected, send the unit to Greenlee for repair. See
the address shown under Warranty.
All manuals and user guides at all-guides.com
IPM-300
11