Greenlee IPM-300 Manual De Instrucciones página 32

Operation (cont'd)
Read AC Voltages
Select the Read mode by pressing the SOURCE/READ button until "READ" appears on the
display. Set the toggle switch to the READ position.
Display: V, AC
Electric shock hazard:
• Do not apply more than the rated voltage between any two input terminals, or
between any input terminal and earth ground.
• Do not contact the test lead tips or any uninsulated portion of the accessory.
Failure to observe these warnings can result in severe injury or death.
1. Turn the Selector knob to VAC READ.
2. Connect the black and red leads to the meter as shown.
3. Take measurement.
32
All manuals and user guides at all-guides.com
AC Voltage Signal
Line Voltage
1
5V MAX 45V MAX
!
INPUT INPUT
!
45V
MAX
INPUT
2
5
4
!
300V
MAX
INPUT
!
T/C
+
–
3