Statement 1006-Chassis Warning For Rack-Mounting And Servicing; Statement 1008-Class 1 Laser Product; Statement 1011-Staring Into Laser Beam; Statement 1016-Invisible Laser Radiation - Cisco ASR 920 Serie Manual Del Usuario

Regulatory Compliance and Safety Information—Cisco ASR 920 Series Aggregation Services Routers
Statement 1006—Chassis Warning for Rack-Mounting and
Servicing
To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions to ensure
Warning
that the system remains stable. The following guidelines are provided to ensure your safety:
•
•
•
Statement 1008—Class 1 Laser Product
Class 1 laser product.
Warning
Statement 1011—Staring into Laser Beam
Do not stare into the beam or view it directly with optical instruments.
Warning
Statement 1016—Invisible Laser Radiation
Invisible laser radiation present.
Warning
Statement 1017—Restricted Area
This unit is intended for installation in restricted access areas. A restricted access area can be accessed only
Warning
through the use of a special tool, lock and key, or other means of security.
OL-32476-01 Rev. V4
This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the heaviest
component at the bottom of the rack.
If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the unit
in the rack.
Regulatory Compliance and Safety Information—Cisco ASR 920 Series Aggregation Services Routers
7