Statement 1035-Proximity To Water; Statement 1040-Product Disposal; Statement 1044-Port Connections; Statement 1045-Short-Circuit Protection - Cisco ASR 920 Serie Manual Del Usuario

Statement 1035—Proximity to Water
Warning Do not use this product near water; for example, near a bathtub, wash bowl, kitchen sink or laundry tub, in a wet
basement, or near a swimming pool.
Statement 1040—Product Disposal
Ultimate disposal of this product should be handled according to all national laws and regulations.
Warning
Statement 1044—Port Connections
For connections outside the building where the equipment is installed, the following ports must be connected
Warning
through an approved network termination unit with integral circuit protection. Ethernet, USB, and PoE
Statement 1045—Short-circuit Protection
This product requires short-circuit (overcurrent) protection to be provided as part of the building installation. Install
Warning
only in accordance with national and local wiring regulations.
Statement 1046—Installing or Replacing the Unit
Warning When installing or replacing the unit, the ground connection must always be made first and disconnected last.
Statement 1047—Overheating Prevention
Warning To prevent the system from overheating, do not operate it in an area that exceeds the maximum recommended
ambient temperature of : -40 to + 70 degree c
Regulatory Compliance and Safety Information—Cisco ASR 920 Series Aggregation Services Routers
10
Regulatory Compliance and Safety Information—Cisco ASR 920 Series Aggregation Services Routers
OL-32476-01 Rev. V4