Statement 7012-Equipment Interfacing With Ac Power Ports; Statement 7013-Equipment Bonding Networks Cbn; Statement 7016-Battery Return Conductor; Statement 7017-Minimum Steady State Dc Input Voltage - Cisco ASR 920 Serie Manual Del Usuario

Regulatory Compliance and Safety Information—Cisco ASR 920 Series Aggregation Services Routers
Statement 7012—Equipment Interfacing with AC Power Ports
This equipment shall be connected to AC mains provided with a surge protective device (SPD) at the service
equipment complying with NFPA 70, the National Electrical Code (NEC).
Statement 7013—Equipment Bonding Networks CBN
This equipment is suitable for installations utilizing the insert Common Bonding Network (CBN).
Note
Statement 7016—Battery Return Conductor
The battery return conductor of this equipment shall be treated as DC Isolated (DC-I).
Statement 7017—Minimum Steady State DC Input Voltage
This equipment will operate without degradation at a minimum steady state voltage of -19 VDC. The nominal
DC input voltage rating is -48 VDC.
Statement 8012—CE MARK with Name and Address of EU
Authorized Representative
OL-32476-01 Rev. V4
Regulatory Compliance and Safety Information—Cisco ASR 920 Series Aggregation Services Routers
15