Technical Specifications; Safety Instructions; Instructions For Power Safety - Menzer LHS 225 Manual Original

MENZER LHS 225
LONG-NECK SANDER
Original instructions
Milý zákazníku,
Dear customer,
By purchasing the MENZER LHS 225 Long-Neck Sander you have selected a product of the highest quality.
We would hereby like to express our gratitude for the trust you have shown in us and our tools.
tions on the following pages. Close observance of the information contained here will ensure an optimum
result for your work. The safety warnings are intended to protect you from accidents that could be caused
by improper use of the long-neck sander.
The MENZER Team
SEZNAM TABLE OF CONTENTS
the storage and application instructions which are described here. The operator of this machine uses it at
1. his or her own risk and assumes full responsibility for doing so. These instructions should be kept and used 1.

TECHNICAL SPECIFICATIONS

TECHNICKÉ ÚDAJE
for future reference.
2.

SAFETY INSTRUCTIONS

2.1

Instructions for power safety

1. TECHNICAL SPECIFICATIONS
2.2 Safety in your working environment
2.3 Operating safety tips
Model: MENZER LHS 225
3. OPERATING THE MACHINE
3.1 Power consumption: 600 W Starting off
3.2 Operating the machine
Driving disc: 3.2.1 Connecting a vacuum cleaner Ø 225 mm
Weight: 3.2.2 Operating the long-neck sander 5 kg
3.2.3 Sanding walls and ceilings
3.2.4 Changing the sanding disc
2. SAFETY INSTRUCTIONS
4. STORAGE
The MENZER LHS 225 Long-Neck Sander has been designed for renovation works and is suitable for the
5. MAINTENANCE
- 5.1 Troubleshooting
5.2 your working environment. Replacing the driving disc
- 5.3 Replacing the brush rim
5.4 Replacing carbon brushes
2.1 INSTRUCTIONS FOR POWER SAFETY
6. MACHINE DETAILS
This machine may ONLY be connected to sockets that provide the operating voltage displayed on the
7. CE DECLARATION
8. TERMS OF GUARANTEE
Keep the external power cable at a distance from the driving disc so that it does not come into contact
plug connector or other machine parts that have electrical contact.
so as to avoid a drop in voltage and overheating.
Do not use the external power cable as a means of carrying the long-neck sander or for hanging the de-
vice. Do not pull on the cable when you wish to disconnect the sander from the power supply. Keep the
not attempt to use the sander when there are signs of damage to the cable.
Version 1.3
CZ 3 EN 3
EN 3
EN 3
EN 4
EN 4
EN 5
EN 5
EN 5
-1
EN 5
EN 6
EN 6
EN 6
EN 6
EN 7
EN 7
EN 7
EN 7
EN 7
EN 8
EN 10
EN 11
-
EN 3