Technical Specifications - Menzer TBS 225 Manual Original

MENZER TBS 225
BRUSKA DRYWALL SANDER
Original instructions
Dear customer,
Milý zákazníku,
By purchasing the MENZER TBS 225 Drywall Sander you have selected a product of the highest quality. We
would hereby like to express our gratitude for the trust you have shown in us and our tools.
tions on the following pages. Close observance of the instructions given here will ensure an optimal result
for your work. The safety warnings contained here are intended to protect you from accidents that could be
caused as the result of improper use of the drywall sander.
The MENZER Team
SEZNAM TABLE OF CONTENTS
and the storage and application instructions described here. The operator of this machine uses it at his
1. or her own risk and assumes full responsibility for doing so. These instructions should be kept and used 1.

TECHNICAL SPECIFICATIONS

TECHNICKÉ ÚDAJE
for future reference.
2. SAFETY INSTRUCTIONS
2.1 Instructions for power safety
1. TECHNICAL SPECIFICATIONS
2.2 Safety in your working environment
2.3 Operating safety tips
Model: MENZER TBS 225
Voltage: 3. OPERATING THE MACHINE 230 V ~ 50 Hz / 110 V ~ 50 Hz
Power consumption: 800 W 3.1 Starting off
3.2 Operating the machine
3.2.1 Driving disc: Connecting a vacuum cleaner 225 mm
Weight: 3.2.2 Operating the drywall sander 3.7 kg
3.2.3 Sanding walls and ceilings
3.2.4 Changing the sanding disc
2. SAFETY INSTRUCTIONS
- 4. STORAGE
The MENZER TBS 225 Drywall Sander is designed for renovation works and is suitable for the sanding of all
- 5. MAINTENANCE
5.1 Troubleshooting
- 5.2 Replacing the driving disc
5.3 Replacing the brush rim
2.1 INSTRUCTIONS FOR POWER SAFETY 5.4 Replacing the carbon brushes
6. MACHINE DETAILS
This machine may ONLY be connected to sockets with a voltage equivalent to that displayed on the ma-
7. CE DECLARATION
8. TERMS OF GUARANTEE
poses the risk of an electric shock for the operator.
since this could cause damage to the cable's insulation. Never attempt to make alterations to the plug
connector or other machine parts with electrical contact.
to prevent voltage drop or overheating.
Do not use the power cable as a means of carrying or hanging the drywall sander. Do not pull on the cable
to use the sander when there are signs of damage to the cable.
2.2 SAFETY IN YOUR WORKING ENVIRONMENT
Ensure that your place of work is always well-ventilated and well-lit so as to avoid potential accidents. In
Verze 1.3 Version 1.3
CZ 3 EN 3
EN 3
EN 3
EN 3
EN 4
EN 5
EN 5
EN 5
-1
EN 5
EN 5
EN 6
EN 6
EN 6
EN 6
EN 7
EN 7
EN 7
EN 7
EN 8
EN 10
EN 11
EN 3