Kit Preparation - Metra 95-8244HG Instrucciones De Instalación

1. Attach the Passenger Air Bag Light
board to the radio housing with the
factory hardware. (Figure A)
2. Attach the Passenger Air Bag Light
board cover to the radio housing
panel over the Passenger Air Bag
Light board using (3) of the
#4 x 3/8" Phillips screws supplied.
(Figure A)
3. Apply the supplied Air Bag Sticker
to the face of the radio housing.
(Figure A)
4. Attach the panel clip and screw
mount to the radio housing using
the factory hardware. (Figure B)
95-8244HG

Kit Preparation

5. Attach the (2) panel clip mounts
to the radio housing using (4)
#4 x 3/8" Phillips screws supplied.
(Figure B)
6. Attach the clips removed in step
7 of disassembly to the panel clip
mounts on the radio housing.
7. Attach the climate control and the
chrome trim to the radio housing.
Continue to kit assembly
(Figure A)
Step 3
(Figure B)
6
Air Bag Sticker
Step 4