Kit Assembly - Metra 95-8244HG Instrucciones De Instalación

Double DIN radio provision
1. Mount the radio brackets to the
radio with the screws supplied
with the radio. (Figure A)
2. Mount the radio/bracket assembly
to the radio housing/climate
control assembly with the
factory hardware.
3. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from
Metra and/or AXXESS.
4. Reassemble dash in reverse order
of disassembly.
95-8244HG

Kit Assembly

(Figure A)
7