Manufacturer's Warranty - Hilti PS 300 Manual Del Usuario

8.2 HiltiMeasuring Systems Service
HiltiMeasuring Systems Service checks the scanning tool and, if deviations from the specified accuracy are
found, recalibrates it and rechecks to ensure conformity with specifications. The service certificate provides
written confirmation of conformity with specifications at the time of the test. The following is recommended:
• Choose a test/inspection interval that matches usage of the device.
• Have the product checked by Hilti Measuring Systems Service after exceptionally heavy use or subjection
to unusual conditions or stress, before important work or at least once a year.
Testing and inspection by HiltiMeasuring Systems Service does not relieve the user of the obligation to
check the scanning tool before and during use.
9 Troubleshooting
9.1 Troubleshooting
If the trouble you are experiencing is not listed in this table or you are unable to remedy the problem by
yourself, please contact Hilti Service.
Malfunction
Scanning tool does not start.
10 RoHS (Restriction of Hazardous Substances)
Click on the link to go to the table of hazardous substances: qr.hilti.com/r9374764.
There is a link to the RoHS table, in the form of a QR code, at the end of this document.
11 Disposal
WARNING
Risk of injury. Hazards presented by improper disposal.
▶ Improper disposal of the equipment may have the following consequences: The burning of plastic
components generates toxic fumes which may present a health hazard. Batteries may explode if
damaged or exposed to very high temperatures, causing poisoning, burns, acid burns or environmental
pollution. Careless disposal may permit unauthorized and improper use of the equipment. This may
result in serious personal injury, injury to third parties and pollution of the environment.
▶ Dispose of defective batteries right away. Keep them out of reach of children. Do not disassemble or
incinerate the batteries.
▶ Batteries that have reached the end of their life must be disposed of in accordance with national
regulations or returned to Hilti.
Most of the materials from which Hilti tools and appliances are manufactured can be recycled. The
materials must be correctly separated before they can be recycled. In many countries, your old tools,
machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative
for further information.
12

Manufacturer's warranty

▶ Please contact your local Hilti representative if you have questions about the warranty conditions.
22 English
Possible cause
Battery not charged.
Contacts on scanning tool or bat-
tery are dirty.
Battery defective.
The display is faulty.
The button is faulty.
Action to be taken
▶ Battery has to be charged.
▶ Clean the contacts and re-insert
the battery.
▶ Contact Hilti Service.
▶ If the green LED in the control
panel lights up but the display
is blank, contact Hilti Service.
▶ If the green LED in the control
panel does not light up, contact
Hilti Service.
2200189
*2200189*