Product Information - Hilti PS 300 Manual Del Usuario

1.6

Product information

Hilti products are designed for professional use and may be operated, serviced and maintained only by
trained, authorized personnel. This personnel must be specifically informed about the possible hazards. The
product and its ancillary equipment can present hazards if used incorrectly by untrained personnel or if used
not in accordance with the intended use.
The type designation and serial number are printed on the rating plate.
▶ Write down the serial number in the table below. You will be required to state the product details when
contacting Hilti Service or your local Hilti organization to inquire about the product.
Product information
Scanner
Generation
Serial no.
2 Safety
2.1 General safety instructions, measuring tools
WARNING! Read all safety precautions and other instructions.
instructions and other instructions can result in electric shock, fire and/or serious injury.
Keep all safety precautions and instructions for future reference.
Work area safety
▶ Keep your workplace clean and well lit. Cluttered or poorly lit workplaces invite accidents.
▶ Do not operate the product in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust.
▶ Keep children and other persons clear when the product is in use.
▶ Use the product only within its specified limits.
Electrical safety
▶ Do not expose the product to rain or moisture. Penetrating moisture can cause short circuits, electrical
shock, burns or explosions.
Personal safety
▶ Stay alert, watch what you are doing and use common sense when operating a measuring tool. Do
not use a measuring tool while you are tired or under the influence of drugs, alcohol or medication.
A moment of inattention while operating the measuring tool can result in serious injury.
▶ Adopt the correct posture when working. Maintain proper footing and balance at all times. This
will allow you to control the measuring tool better, even in unexpected situations.
▶ Wear personal protective equipment. Depending on the type of measuring tool you are using and its
purpose, wearing personal protective equipment such as a dust mask, non-slip safety shoes, hard hat,
or hearing protection reduces the risk of injury.
▶ Do not render safety devices ineffective and do not remove information and warning notices.
▶ Avoid starting the tool accidentally. Make sure that the measuring tool is switched off before
connecting it to the battery and before picking it up or carrying it. Carrying measuring tools with your
finger on the switch or plugging in measuring tools that are already switched on can cause accidents.
▶ Use the product and accessories in accordance with these instructions and in the way specified for
this special type of tool. Take the working conditions and the task to be performed into account.The
use of products for applications other than those intended can lead to hazardous situations.
Using and handling the measuring tool
▶ Do not use a measuring tool if it has a faulty on/off switch. A measuring tool that can no longer be
switched on or off is dangerous and must be repaired.
▶ Store measuring tools out of reach of children when not in use. Do not allow persons who are not
familiar with the product or these instructions to operate it. Measuring tools are dangerous in the
hands of inexperienced persons.
▶ Measuring tools need care and attention. Check that moving parts operate satisfactorily and do
not jam, and make sure that no parts are broken or damaged in such a way that the measuring
tool might no longer function correctly. Have damaged parts repaired before using the measuring
tool. Many accidents are caused by poorly maintained measuring tools.
▶ Do not under any circumstances modify or tamper with the product. Changes or modifications not
expressly approved by Hilti may restrict the user's authorization to operate the equipment.
14 English
PS 300 | PS 300­W
01
Failure to observe the safety
2200189
*2200189*