Cleaning The Plate; Cleaning Oven - Angelo Po 1N1PE4EV Manual De Uso

– Take special care not to damage stainless
steel surfaces. In particular, avoid the use of
corrosive products and do not use abrasive
materials or sharp tools.
To carry out this operation, proceed as follows.
Switch the appliance off and leave it to cool.
1)
Turn off the circuit-breaker to disconnect it
2)
from the electrical mains.
Clean the plate thoroughly with a sponge
3)
and normal detergent, rinse with plenty of
water and dry.
Important
Do not spray water onto the plates when still
hot as this can damage them.
From time to time, after cleaning the plates,
4)
apply a small amount of linseed oil or a
similar product.
To carry out this operation, proceed as follows.
Remove the bottom plate (A) and the grid (B)
1)
from the oven and clean them thoroughly.
Clean the inside parts of the oven to remove
2)
any deposits which may impair its operation.
Dry the surfaces and reassemble the compo-
3)
nents.
3320030_ut_GB_rev.1
– Remove food residues immediately before
they set.
– Remove the limescale deposits which may
form on some of the appliance's surfaces.

CLEANING THE PLATE

CLEANING OVEN

B
A
- 13 -
GB
ENGLISH