Safety Devices; Safety And Information Signs; Optional Accessories - Angelo Po 1N1PE4EV Manual De Uso

Although the appliance is complete with all sa-
fety devices, during installation and connection
additional devices must be added if necessary
to comply with the relevant legal requirements.
Safety thermostat: cuts off the electricity
A)
supply to the oven in case of overheating.
Auto-resetting thermostat: each plate is
B)
equipped with this device, which halves its
power output in case of overheating. Once
the problem has been resolved and the tem-
perature has returned to normal, operation is
automatically restored.
The illustration shows the position of the
devices.
Nameplate with manufacturer and
A)
appliance data.
General hazard: read the manual carefully
B)
before carrying out any procedure.
General hazard: When washing the applian-
C)
ce do not point pressurised water jets at
internal parts.
General hazard: all relevant regulations
D)
must be complied with. "Install in complian-
ce with the relevant regulations and use in
well ventilated premises only".
General hazard: all relevant regulations
E)
must be complied with. "No liability is ac-
cepted in case of failure to comply with the
installation and commissioning instructions".
Burn hazard: watch out for hot surfaces.
F)
CE marking: this indicates that the
G)
equipment is compliant with all relevant laws
applicable to the product.
The appliance can be equipped with the
following accessories on request ("see general
catalogue").
3320030_ut_GB_rev.1

SAFETY DEVICES

SAFETY AND INFORMATION SIGNS

OPTIONAL ACCESSORIES

- 5 -
Important
There are no indicator devices to signal that
the thermostat with automatic reset has
been tripped.
E
D
F
37M3202
C B
WEEE symbol: indicates that the appliance is
H)
subject to specifi c waste disposal regulations.
A
A
H
G GB
ENGLISH