The Brake; The Push Bar; The Carry Cot - Mutsy i2 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 71
Pumping up the air tyres (i2 accessory: rear wheels air tyre set)
· The air pressure in the air tyres may decrease after a while. Check the
pressure regularly and is necessary pump up the tyres.
· Press the pump firmly onto the valve. Pump up the tyres until the
required air pressure has been reached. The air pressure in the tyres
may never exceed 16 PSI / 1.1 bars.
· Air tyres may leave traces on some surfaces.
The brake (i)
· Push the pedal downwards with your foot to block the brake.
· Push the pedal upwards with your foot to unblock the brake.
The push bar (j)
· The push bar has three different height positions. Press the pushbar
setting button and move the pushbar higher or lower while keeping
the button depressed.
· Release the button when the push bar is in the desired position.
The carry cot (up to 9 kg)
· The carry cot is suitable for transporting children from birth up to 9 kg /
20 lbs in a lying position.
· The carry cot is suitable for a child who cannot sit up by itself, roll over
and cannot push itself up on its hands and knees.
· You can also use the carry cot separately from the chassis.
· Check the base, the edges and the carry belts on the carry cot regularly
for any wear and tear.
· Make sure that the chassis has been fully unfolded and the brake is
blocked during all actions indicated below.
Place the carry cot (k)
· Place the attachable elements on the carry cot into the attachment
points on the chassis and press the carry cot downwards until you hear
a click on both sides.
· Check to ensure that the red sections on the chassis attachment points
are no longer visible. Check that the carry cot has been installed
securely by trying to lift it from the chassis.
Remove the carry cot (l)
· Slide the unlocking buttons upwards until you hear a click on both sides.
Be careful! The carry cot is now unlocked; the red sections on the chassis
attachment points are now visible. Take the carry cot firmly by the handle
on the hood and remove it from the chassis in a vertical movement.
27

Publicidad

Tabla de contenido
loading

Tabla de contenido