The Wheels - Mutsy i2 Manual Del Usuario

height adjustment button (c1) of the pushbar in and move this to the
lowest setting. Pull the folding safeguard (c2) towards you on both
sides and turn the pushbar forwards until the pushbar lies on the
frame (c3).
· Pinch the chassis unlocking buttons and fold the chassis (d).
· The folding safeguard locks automatically when the product is
folded up.
· The integrated carry handle, which is located under the rear axle, has
made lifting and carrying the folded pushchair more practical.

The wheels

Assemble the rear wheels (e)
· Slide the axle of the rear wheel in the rear wheel casing until you hear a
click. Pull the wheel to check that it has been attached firmly.
Disassemble the rear wheels (f)
· Press the button on the inside of the rear wheel casing and take the
wheel off the chassis
Assemble the front wheels (g)
· Slide the axle of the front wheel upwards in the front wheel casing until
you hear a click. Pull the wheel to check that it has been attached firmly.
Disassemble the front wheels (g)
· Push the button on the front side of the front wheel and pull the wheel
from the front wheel casing.
The swivelling wheels (h1)
· Turn the ring above the front wheel inwards on both sides in order to
block the swivel setting. The swivelling wheels will automatically be
locked when the wheels are placed in the rear direction.
· Turn the ring above the front wheel on both sides outwards to unlock
the swivelling wheels.
Variable Suspension (h2)
· The front wheels have variable suspension integrated into them for ex-
tra comfort for your child. The variable suspension allows you to adjust
the suspension according the child's weight.
· Position 1: Use this position for the carrycot and car seat configurations,
until your child is 6 months old.
· Position 2: Use this position for the seat and car seat configurations for
children over the age of 6 months.
26