The Wheels; The Brake - Mutsy NIO Manual De Instrucciones

· Pull the folding buttons (c2) towards you, on both sides, and turn the
push-bar forwards until it is located on the chassis (c3).
· Pinch the chassis unlocking buttons and fold the chassis (d).
· The folding safeguard locks automatically when the product is
folded up.

The wheels

Assemble the rear wheels (e)
· Slide the axle of the rear wheel in the rear wheel casing until you hear a
click. Pull the wheel to check that it has been attached firmly.
Disassemble the rear wheels (f)
· Press the button at the back of the rear wheel casing and remove the
wheel from the frame.
Assemble the front wheels (g)
· Press the button on the back of the front wheel and pull the wheel out
of the front wheel casing.
Disassemble the front wheels (g)
· Push the button on the front side of the front wheel and pull the wheel
from the front wheel casing.
The swivelling wheels (h1)
· Turn the ring above the front wheel inwards on both sides in order to
block the swivel setting. The swivelling wheels will automatically be
locked when the wheels are placed in the rear direction.
· Turn the ring above the front wheel on both sides outwards to unlock
the swivelling wheels.
Pumping up the air tyres (Nio accessory: rear wheels air tyre set)
· The air pressure in the air tyres may decrease after a while. Check the
pressure regularly and is necessary pump up the tyres.
· Press the pump firmly onto the valve. Pump up the tyres until the
required air pressure has been reached. The air pressure in the tyres
may never exceed 16 PSI / 1.1 bars.
· Air tyres may leave traces on some surfaces.
The brake (i)
· Push the pedal downwards with your foot to block the brake.
· Push the pedal upwards with your foot to unblock the brake.
EN
19